Tuesday, February 24, 2009

Sunday, February 15, 2009

True Love

cannot be expressed in words .. Saeco12 , member of sporthoj.com shows you what true love is:

Thursday, February 12, 2009

Linux: Apache and SVN with mod_dav and mod_dav_svn

This shows Apache2 and SVN with basic authentication. Digest didn't work for me. If you have it working with Digest authentication, please comment on this post.

The following lines need to be enabled in /etc/httpd/conf/httpd.conf:

LoadModule dav_module modules/mod_dav.so
LoadModule dav_svn_module modules/mod_dav_svn.so

Then the following section needs to be created:

Now you need to create the /etc/svn-auth file and add users to it with:
htpasswd -c /etc/svn-auth

Restart Apache, and you should be able to browse your repository

Sunday, February 08, 2009

Install frame sliders Yamaha FZ6 S2

Installing frame sliders seems just a bit more tricky than assembling something from IKEA.
the bolts are steel, the frame is aluminium, you don't want to tighten it too hard. You might want to apply some locking agent so the engine doesn't fall off because the vibration loosened the bolts. I'm planning on taking some screenshots of the bike and manual, write down some figures for torque tightening, locking agent, and so on.

First of all, go get a torque wrench, and Loctite locking agent Loctite 242 Blue which specifically should resist vibration or Loctite 222 blue ( Loctite® 222 Low strength threadlocker for fasteners up to M36. Allows disassembly with normal tools. Approvals; P1 NSF Reg. No.: 123002 Thread size: up to M 36 Strength: low; Functional strength (average at 22°C): 6 hours breakloose torque determined in accordance with DIN 54454: 6 Nm)

... (Nagging wife, gotta go)